Gen III Prius - Customizable Parameters
HINT:
The following items can be customized.
1. POWER DOOR LOCK CONTROL SYSTEM
Display
|
Default
|
Content
|
Setting
|
Unlock Key Twice
|
ON
|
Function that unlocks
only the driver door when the driver door key cylinder is turned to
unlock once, and unlock all doors when it is turned to unlock twice. For
the OFF setting, turning it once unlocks all doors.
|
ON or OFF
|
Auto Lock
|
OFF
ON*
|
Function that locks all doors when the vehicle speed reaches a certain level.
|
ON or OFF
|
Auto Lock/Shift
|
ON
OFF*
|
Function that locks all
doors when the shift lever is moved from P to any position other than P
while the engine is running and all doors are closed.
|
ON or OFF
|
Auto Unlock/Shift
|
ON
|
Function that unlocks all
doors when the shift lever is moved to P from any position other than P
while the power switch is on (IG).
|
ON or OFF
|
All Unlock/Open-Close
|
OFF
|
Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.
|
ON or OFF
|
Display
|
Default
|
Content
|
Setting
|
Lighting Time
|
15 s
|
Function that changes the
lighting time after closing all doors. (It will quickly fade out in
case of turning the power switch from off to on (ACC) or (IG).)
|
7.5 s, 15 s or 30 s
|
2. WIRELESS DOOR LOCK CONTROL SYSTEM
Display (item)
|
Default
|
Function
|
Setting
|
Wireless Control
|
ON
|
Function that turns wireless door lock function on or off
|
ON or OFF
|
Hazard Answer Back
|
ON
|
When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
|
ON or OFF
|
Open Door Warning
|
ON
|
The buzzer sounds when lock is pressed when any of the doors are ajar.
|
ON or OFF
|
Unlock 2 Operation
|
ON
|
Function that unlocks
driver door when unlock switch on transmitter is pressed once, and
unlocks all doors when pressed twice. If setting is OFF, pressing unlock
switch once makes all doors unlock.
|
ON or OFF
|
Panic Function
|
ON
|
Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds
|
ON or OFF
|
Auto Lock Time
|
60 s*1 or 30 s*2
|
Function that regulates the interval between unlocking and automatic relocking of doors
|
30 s, 60 s or 120 s
|
Wireless Auto Lock
|
ON
|
This function turns the wireless auto lock function on or off.
|
ON or OFF
|
Wireless Buzzer Resp
|
ON
|
Wireless door lock buzzer response
|
ON or OFF
|
Wireless Buzzer Vol
|
Level7
|
Wireless door lock buzzer volume
|
Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0
|
Display
|
Default
|
Content
|
Setting
|
Lighting Time
|
15 s
|
Changes the lighting time
after closing all doors. (It will quickly fade out in case of turning
the power switch from off to on (ACC or IG).)
|
7.5 s, 15 s or 30 s
|
3. SMART KEY SYSTEM (for Entry Function)
Tester Display
|
Default
|
Content
|
Setting
|
Park Wait Time
|
2.5 s
|
Function that sets waiting time to permit opening door after door is locked with entry lock function
|
0.5 s, 1.5 s, 2.5 s or 5 s
|
Ignition Available Area
|
All
|
Function that switches the entry hybrid vehicle control system start detection area
|
Front or All*1
|
Back Door Opening Operation*2
|
Long
|
Function that opens the back door when the driver has the key and presses back door opener switch assembly (opener switch)
|
Long, Twice or OFF
|
Door Unlock Mode*2, *3
|
Driver
|
Function that chooses the doors to be operated by entry unlock operation
|
All or Driver
|
Touch Activation Over Threshold
|
Active
|
The function that limits
the consecutive entry lock operation to only 2 times can be changed
between Active and Not Active. When in Not Active mode, there is no
limit for the number of times that the consecutive entry lock operation
can be performed.
|
Active or Not Active
|
Tester Display
|
Default
|
Content
|
Setting
|
Key Low Battery Warning
|
ON
|
Function that warns driver that the key battery is weak
|
ON or OFF
|
4. ENTRY UNLOCK MODE SWITCHING* (SMART KEY SYSTEM (for Entry Function))
*: except for Korea and Mexico
(a)
To change the vehicle entry unlock mode, make sure that the vehicle
power is off and simultaneously push and hold the lock switch and
another switch on the key for 5 seconds.
Driver door unlock default setting:
When
the switches are pressed and held for 5 seconds, the entry door unlock
mode changes to the mode that is not currently selected.
NOTICE:
After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.
(b)
The certification ECU (smart key ECU assembly) receives this signal
from the door control receiver assembly and changes the smart key system
to entry unlock mode.
(c) The certification ECU (smart key ECU assembly) sounds the buzzers of the wireless door lock buzzer assembly.
Mode
|
Wireless Door Lock Buzzer Assembly
|
Driver Door
(Default)
|
Sounds 3 times
|
All Doors
(Customized)
|
Sounds 2 times
|
HINT:
The
procedure only changes entry unlock mode of the smart key system. It
does not switch the unlocking of the wireless door lock control.
5. ELECTRICAL KEY CANCEL (SMART KEY SYSTEM (for Entry Function))
The electrical key cancel operation disables the following functions:
(a) The operation procedure is as follows:
Precondition:
Power switch off, driver door closed and unlocked.
(1) Push the unlock switch of the key once.
(2) Open the driver door within 5 seconds.
(3) Push the unlock switch of the key twice within 5 seconds.
(4) Close and open the driver door twice within 30 seconds.
(Driver door: Close → Open → Close → Open)
(5) Push the unlock switch of the key twice within 5 seconds.
(6) Close and open the driver door within 30 seconds.
(Driver door: Close → Open)
(7) Close the driver door within 5 seconds.
When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
To
return to the original condition, perform the procedure again. When the
original condition is returned, the wireless door lock buzzer sounds
once.
6. SMART KEY SYSTEM (for Start Function)
Tester Display
|
Default
|
Content
|
Setting
|
Ignition Available Area (Entry ignition available area)
|
All
|
Function to choose the available area for electrical key to start the hybrid control system.
|
Front or All*
|
7. CUSTOMIZING FUNCTION WITHOUT TECHSTREAM (SMART KEY SYSTEM (for Start Function))
Performing the following procedure disables the smart key system.
HINT:
To start the hybrid control system while the smart key system is disabled, follow the procedure for when the key battery is low
(a) The operation procedure is as follows:
Precondition:
Power switch off, driver door closed and unlocked.
(1) Push the unlock switch of the key once.
(2) Open the driver door within 5 seconds.
(3) Push the unlock switch of the key twice within 5 seconds.
(4) Close and open the driver door twice within 30 seconds.
(Driver door: Close → Open → Close → Open)
(5) Push the unlock switch of the key twice within 5 seconds.
(6) Close and open the driver door within 30 seconds.
(Driver door: Close → Open)
(7) Close the driver door within 5 seconds.
When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
To return to the original
condition, perform the procedure again. When the original condition is
returned, the wireless door lock buzzer sounds once.
8. LIGHTING SYSTEM (LIGHTING INT)
Illuminated Entry
Tester Display
|
Default
|
Content
|
Setting
|
Lighting Time
|
15 s
|
Changes the lighting time
after closing all of the doors. (It will fade out immediately in case
of turning the power switch from off to on (ACC or IG).)
|
7.5 s, 15 s or 30 s
|
I/L when ACC OFF
|
ON
|
Lights up power switch
illumination, front interior lights, rear interior light and footwell
lights when the power switch is turned from on (ACC or IG) to off.
|
ON or OFF
|
I/L ON W/Door Key Unlock
|
ON
|
Lights up power switch
illumination, front interior lights, rear interior light and footwell
lights when doors are unlocked using a mechanical key or door control
transmitter.
|
ON or OFF
|
Light Control
|
ON
|
Dims (ON setting) or turns off (OFF setting) the footwell lights under the following conditions:
Power switch on (IG), shift lever not in P, and all doors closed.
|
ON or OFF
|
Room Light when Aprchd
|
ON
|
Lights up the power
switch illumination, front interior lights, rear interior light and
footwell lights when a key enters any actuation area around the doors.
|
ON or OFF
|
Inside Foot Light
|
ON
|
Lights up the footwell
lights when one of the following occurs: the power switch is turned on
(IG), or any door is unlocked or opened.
|
ON or OFF
|
9. METER / GAUGE SYSTEM
Warning
Tester Display
|
Default
|
Content
|
Setting
|
Key Remind Sound
|
Slow
|
Function to change the cycle of the key reminder buzzer
|
Normal, Fast or Slow
|
Driver Side Seatbelt Warning Buzzer*1
|
ON
|
Function to turn on/off the seat belt warning buzzer
|
ON or OFF
|
Front Passenger Side Seatbelt Warning Buzzer*1
|
ON
|
Function to turn on/off the seat belt warning buzzer
|
ON or OFF
|
Rear Seatbelt Warning Buzzer*2
|
ON
|
Function to turn on/off the rear seat belt warning buzzer
|
ON or OFF
|
Reverse Buzzer
|
Continual
|
Function to change the type of the reverse warning buzzer
|
Single or Continual
|
*1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.
*2: w/ Rear Seat Belt Warning
10. SEAT BELT WARNING SYSTEM
Combination Meter
Tester Display
|
Default
|
Content
|
Setting
|
Driver Side Seatbelt Warning Buzzer
|
ON
|
Function to sound the seat belt warning buzzer
|
ON / OFF
|
Front Passenger Side Seatbelt Warning Buzzer
|
ON
|
Function to sound the seat belt warning buzzer
|
ON / OFF
|
HINT:
This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.
11. AIR CONDITIONING SYSTEM
Air Conditioner
Display (Item)
|
Default
|
Content
|
Setting
|
Set Temperature Shift
|
Normal
|
Function to control with the shifted temperature against the displayed temperature.
|
+2 C, +1 C, Normal, -1 C or -2 C
|
Compressor Mode
|
Automatic
|
Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off.
|
Manual or Automatic
|
Air Inlet Mode
|
Automatic
|
Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on.
|
Manual or Automatic
|
Foot/DEF Auto Mode
|
ON
|
Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on.
|
OFF or ON
|
Foot/DEF Automatic Blow Up Function
|
ON
|
Function to automatically increase the blower level when the defroster is on.
|
OFF or ON
|
Ambient Temperature Shift
|
Normal
|
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
|
+3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C
|
ECO MODE Cancel
|
OFF
|
Function to cancel the ECO mode drive when item is on.
|
OFF or ON
|
Noise and Vibration Reduction
|
OFF
|
Function to change speed of the compressor when item is on.
|
OFF or ON
|
Start Pre A/C*1
|
Long1
|
Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter).
|
1 tim ON, 2 tim ON, Long1 or Long2
|
Stop Pre A/C*1
|
2 tim ON
|
Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter).
|
1 tim ON, 2 tim ON, Long1 or Long2
|
*1: w/ Remote Air Conditioning System
12. LIGHTING SYSTEM (LIGHTING EXT)
Light Control
Display
|
Default
|
Content
|
Setting
|
Disp Ex ON Sen
|
Normal
|
Changes the ambient
brightness level required to dim the lights such as the indicator lights
of the combination meter, A/C indicator light and clock.
|
Light2, Light1, Normal, Dark1 or Dark2
|
Disp Ex OFF Sen
|
Normal
|
Changes the ambient
brightness level required to cancel the dimming of the lights such as
the indicator lights of the combination meter, A/C indicator light and
clock.
|
Light2, Light1, Normal, Dark1 or Dark2
|
Light Auto OFF Delay
|
30 s
|
Keeps the headlights on
for a certain period of time after turning the power switch off and
closing all the doors with the low beam headlights on.
|
Off, 30 s, 60 s or 90 s
|
Sensitivity
|
Normal
|
Adjusts the sensitivity of the automatic light control system.
|
Light2, Light1, Normal, Dark1 or Dark2
|
Response Time*1
|
0.1 s
|
Changes the delay timing
of lighting the taillights when going into a tunnel when the light
control switch is in the AUTO position
|
0.1 s or 1.0 s
|
|